Name: 8PG-80 Self-propelled Multi-nozzle Sprinkler Truck
SKU: 2492720

Product Introduction

Direct Pump Integration:The system connects directly to well pumps via flexible soft hoses. It requires only 0.2 MPa (2 bar) of water pressure to begin effective field irrigation.
Modular Hose System: Equipped with 20-meter quick-connect hose segments. The total length can be flexibly adjusted to match the specific dimensions of your field.

Battery-Powered Propulsion: Driven by a 48V battery pack and an 800W high-torque motor. The traveler features automated self-propulsion for laying out hoses, with an adjustable speed of up to 45 meters per minute.
Single-Person Operation: Features a manual winch/reel system for both laying and retrieving hoses. The design is engineered for maximum labor savings, allowing a single operator to manage the entire irrigation process with ease.

Wide-Angle Spraying: Designed for stationary irrigation with a multi-gun combination, providing a massive 270-degree semi-circular coverage area.
High Flow Capacity: Optimized for 80mm diameter hoses, achieving a maximum flow rate of 50 tons per hour. This allows for the irrigation of approximately 0.1 to 0.13 hectares (1.5–2 mu) per hour.
Dynamic Range:The spraying radius scales with pump pressure, reaching a maximum radius of 35 to 40 meters for long-distance coverage.

Independent Valve Control: Each spray gun is equipped with an individual control valve. Operators can activate specific guns based on the pump’s output to fine-tune the total flow and spray distance.
Overlapping Spray Pattern: Utilizes different spray gun models for long, medium, and short ranges to eliminate "blind spots." This significantly improves irrigation uniformity, ensuring every inch of the crop receives adequate water.
Variable Watering Intensity:Seeding/watering time can be adjusted at will to control the volume of water applied (heavy vs. light irrigation).

Rapid Deployment Cycle:Once a section is completed, simply shut off the pump and use the manual reeler to retract the hose. The electric motor then moves the traveler to the next hydrant/connection point for rapid re-attachment and continuous operation.